BLACK FRIDAY - WE'LL PAY YOUR WINTER GAS BILLS. MORE INFO
Baxi Boiler Fault Codes
The most common fault codes for the Baxi Platinum combi boiler
Baxi Boiler Fault Codes
| Fault code | Fault |
|
E20 |
Central heating NTC fault |
|
E28 |
Flue NTC fault, air pressure switch fault, blocked flue, blocked condensate or wiring fault |
|
E50 |
Hot water NTC fault |
|
E110 |
Your boiler made have overheated - try bleeding your radiators |
|
E119 |
Water pressure too low |
|
E125 |
Circulation fault (primary circuit) - try bleeding your radiators |
|
E130 |
Flue NTC operated |
|
E133 |
Interruption of gas supply or flame failure - gas supply fault |
|
E160 |
Fan or fan wiring Fault |
|
E193 |
Pre-circulation fault |
What is NTC?
An NTC or ‘Negative Temperature Coefficient’ is a type of thermistor (or thermal resistor).
Basically, it’s an electrical component that helps to regulate the temperature of your boiler. So, when you set your heating to a certain temperature it will make sure your boiler stays at that temperature.
Safety Warning
When your Baxi boiler error codes or fault lights flash, don’t do any repair work that involves working with gas as you are required to be Gas Safe Registered by law.
Here at Boiler Plan all our engineers are Gas Safe Registered and will do an amazing job with any Baxi boiler repair work you may need.
Cosy up with a better boiler company
We exist to be completely transparent – no bull, no waffle, no confusion.